The Snap Server® 14000 Motherboard Tray Assembly
Snap Server 14000
2
Field Service Documentation
Copyright © 2009, Overland Storage, Inc. All rights reserved. Information in this document is subject to change without notice and does
not represent a commitment on the part of Overland Storage or any of its subsidiaries.
Shutting Down the Server
1
Shut down the server.
Caution
Shut down the server before you make any repairs.
Improper shutdown may
lead to loss of data or physical harm.
2
Turn off the power modules.
Make sure the switch on each power module is in the off position.
3
Disconnect the AC power cords from the back of the server.
4
Disconnect the SCSI and Ethernet connectors.
Removing the Motherboard Tray Assembly
1
At the back of the server, loosen the 2 thumbscrews on either side of the
motherboard tray assembly.
2
Pull the motherboard tray assembly out of the server.
3
Place the motherboard tray assembly on a grounded, padded surface.
Power module on/off
switch in off position
Thumbscrews on the
motherboard tray assembly
