10400328-001 02/2011
©2011 Overland Storage, Inc.
W
2-3
SnapServer GuardianOS 6.5 Setup Guide
Safety Precautions
External Power Supply
The SnapServer 110 and 210 include an external power
supply and three AC power cords (1 U.S., 1 U.K., and 1 EU).
Power Cord Retention Clip
The SnapServer 110 and 210 include a retention clip that
attaches to the rear of the unit to prevent the power cord from
becoming dislodged.
Rack Mount Assemblies
Mounting brackets or slide rail assemblies for installing the
server into a standard EIA rack come with every rack-
mountable SnapServer. See the next section, “Basic Hardware
To Be Acquired from Third-Party Vendors” for additional
requirements for your SnapServer or expansion array.
Expansion Cables
SnapDisk E2000 and Snap Expansion S50 connect to their
host SnapServer via SAS cables. SnapDisk E2000s and Snap
Expansion S50s each come with one SAS external cable.
Expansion Array Controller Card
(optional)
The capacity of SnapServer 520, 550, 620, and 650 can be
increased through the connection of one or more Snap
Expansion S50 expansion arrays to a controller card installed
in the host SnapServer. A SAS controller card is included on
the SnapServer 550 and 650; a SAS card can be ordered for
the 520 and 620 by going to
and
selecting the How to Buy tab.
Note:
The N2000 comes with a pre-installed expansion card
for use with SnapDisk E2000 expansion arrays.
SCSI Card (optional)
The SnapServer 410, 510, 620, and N2000 can be upgraded
to include a SCSI card for attaching a tape backup device.
If you require a SCSI card for your existing SnapServer, you can
obtain one by going to
and
selecting the How to Buy tab.
Dual- or Quad-Gigabit Ethernet
PCI Adapter (optional)
The number of Ethernet ports on the SnapServer 510, 520,
550, 620, and 650 can be increased to four with the
installation of a dual-Gigabit Ethernet PCI adapter. The
SnapServer N2000 can be increased to six Ethernet ports with
the installation either of one Quad-Gigabit Ethernet PCI
adapter or two dual-Gigabit Ethernet PCI adapters. To order
one of these adapters, go to
and
select the How to Buy tab.
Dual Power Supply (optional)
The SnapServer 550, 650, N2000, and SnapDisk E2000
come with dual power supplies. The SnapServer 510 and 520
come with a single power supply but can be upgraded to a
configuration with dual power supplies, which can be ordered
separately by going to
and
selecting the How to Buy tab.
Component
Description
