NEO S-Series User Guide
10400666-001
© 2014 Overland Storage, Inc.
Page 35
4.
Remove the cables on the rear panel of the library.
5.
Remove the power supply; see Chapter Removing a power supply, Page 33.
6.
Remove the tape drive(s); see Chapter Removing a tape drive, Page 31.
7.
Remove the library controller; see
Chapter Removing the library controller, Page 32.
Removing the base chassis from the rack
4.10.2
To remove the base chassis from the rack, adhere strictly the following steps:
1.
Using a 3# Phillips screwdriver placed through the small holes in the mounting bracket to loosen the M5
screw(s) on each side of the library.
2.
Remove the library from the rack rails.
3.
Remove the mounting brackets of the library.
4.
If available:
•
Remove the shipping lock and the yellow label on the rear panel.
•
Replace the shipping lock on the top of the library.
•
Replace yellow label to securing the shipping lock on the top of the library
5.
To store or ship the removed base chassis, repackage it in the original packaging materials,
see
Chapter Packaging, Page 36.
Replacing the base chassis
4.11
Use this procedure to replace the base chassis with another base chassis:
1.
To remove the base chassis from the rack,
see
Chapter Removing the base chassis,
10.10
.
To install the new base chassis and its components, see
Chapter Installing,7.
