background image

Part Number 10400214-101 05/2009

©2009 Overland Storage, Inc.

Page 2 of 2

Move XpressChannel Cover Plate

If the old library used the XpressChannel feature, move 
the 

XpressChannel

 

cover plate

 from the new chassis to 

the old unit (

Figure 2

)

.

Figure 2.  Removing the XpressChannel Cover

1.

On the 

new

 unit, remove and discard the 

two screws

 

(located inside drive bays #2 and #4) that secure the 
cover plate.

2.

Remove and discard the 

top cover screw

.

3.

Remove and discard the 

two screws

 outside (next the 

power supplies) that hold the cover.

4.

Move the XpressChannel 

cover plate 

from the new 

chassis to the 

old

 chassis.

5.

Install a 

new M3x6mm 

flathead

 

screw in the top hole.

6.

Install 

two new M4x8mm

 flathead screws inside 

drive bays #2 and #4.

7.

Install 

two new M4x8mm

 flathead screws on the 

outside (next the power supplies), securing the cover. 

Reinstall the Library

1.

Using a mechanical lifter (or two people), reinstall the 

library

 into the rack.

2.

If removed, reinstall the 

drive assemblies

.

3.

If used, reconnect the 

XpressChannel

 and, for a 

Master unit, plug in the 

DB-15 cable

.

4.

Reconnect the 

external cables

.

5.

For SCSI systems, verify the 

terminators

 are still in 

place.

6.

Manually open the doors and reinstall the 

magazines

.

Power On the Library

1.

Plug in the 

power cords

.

2.

Turn the power supply 

switches

 to ON (|).

3.

Press the 

GUI touchscreen

 to power on the module.

Configure the Library

Depending on the type of module, do one of the following:

For a 

Master/Standalone

 module:

a.

Using the default Administrator password (“2”), log 
on to 

WebTLC

.

b.

Using the printed partial 

Trace Log

, reconfigure 

the library to match its previous configuration.

c.

Change the Administrator 

password

.

d.

If necessary, re-enter any 

feature key

 codes.

For a 

Slave

 module, use the GUI to change it to Slave 

mode.

NOTE: For full details, refer to the NEO 4000

E

 User Guide.

Return Old Chassis

Using the replacement part box and packing, return the 

old chassis

 to Overland Storage.

Complete the Exchange

N

EO

-9

19

8

M3x6mm 

4x8mm

4x8mm

Locking Bracket

Additional Help

You can get additional technical support on the Internet at 

http://support.overlandstorage.com

, or call 

1-877-654-3429 (toll-free U.S. & Canada), +44 (0) 118-9898050 (Europe), or +1 (858) 571-5555 Option 5 (International).

Отзывы: