SAFETY NOTICE
This Tritium Monitor has been designed and tested in accordance with EN 61010-1. To ensure that
the monitor is used safely, follow all safety and operating instructions in this manual. If the monitor is
not used as described in this manual, the safety features of the monitor might be impaired.
x
Do not use the monitor unless it is fully assembled, housed inside the case secured with the
screw fasteners it was supplied with.
x
Turn off the power and remove the plug connection from the AC power converter before
removing batteries.
x
Make sure the battery covers are properly closed and secured.
x
Remove the battery from the monitor if the monitor is to be stored for long periods.
x
This instrument has not been designed for indiscriminate opening or disassembly of the internal
parts. The bias voltage batteries are always connected to the ionization chamber cans, even
when the instrument is switched OFF. The electronics contains highly sensitive
semiconductors which are destroyed by even the slightest electrostatic discharge
x
Not suitable for use in wet locations
x
Not suitable for use in explosion hazard environments
x
Refer to instruction label when connecting to the external jack for supplementary power input.
DO NOT EXCEED 3.5VDC! Use only the AC power converter that was supplied with the
monitor.
SYMBOLS
The following international symbols are used with this manual and equipment:
Important Safety Information in Manual
DC (direct current)