background image

 

Page 

13

7.1.   D-CELL BATTERY REPLACEMENT

 

 

The Model RS400-HTO with optional Alkaline batteries uses (2) “D” size Alkaline batteries. The 
batteries will need to be replaced within an hour after the low battery light illuminates.   
 

NOTE: Remove the batteries before shipment or inactive storage of more than 30 days 

  

 

This instrument contains components that are easily destroyed if the case is opened and 
handled without proper precaution.  If damage occurs, the repair will not be covered under 
warranty.  Avoid touching the ionization chambers and the PC Board Assemblies to reduce 
the risk of damage. 

 

 
 
 

8.0.  SERVICE AND SUPPORT

 

 

This instrument contains highly sensitive semiconductors which are destroyed by even the 
slightest electrostatic discharge if the case is opened and the instrument is handled without proper 
precaution. 

 
 

Special training can be given to qualified technical personnel who are entrusted with instrument 
service and repair responsibility. 

 
 

Warranty is void if maintenance or repair (other than that which is listed in this manual) is 

 

performed by an unauthorized repair facility. 

 

OVERHOFF TECHNOLOGY CORPORATION 

Telephone (513) 248-2400 

Facsimile  (513) 248-2402 

Email: [email protected] 

 
 
 
9.0.   WARRANTY 

 

All instruments built by Overhoff Technology Corporation are warranted to perform as claimed. 

 

Defective components or workmanship of the instrument will be corrected free of charge for parts 
or labor within a period of one year from delivery. Nonperformance of the instrument as a result of 
negligence on behalf of the customer is not covered by this warranty. 

 
 

Should it appear to be necessary to return the instrument to our factory, authorization for the 

 

return must be obtained from Overhoff Technology Corporation prior to shipping. In-freight 

 

charges will be borne by the customer.

 

 
 
 
 
 
 
 
 
 
 

Содержание RS400-HTO

























Отзывы: