oventrop Multidis SF, Руководство по эксплуатации

Страница: 22 / 40

Multidis SF
Accessories and spare parts
(Example: Presetting 2.5 = 2.5 turns)
3.
Turn the adjusting screw against the valve
spindle as far as it will go using a 6 mm
hexagonal spanner.
The last set value can be restored using
the adjustment screw if, for example, the
heating/cooling circuit is shut off by the
valve spindle at a later time.
4.
Perform this procedure for all heating and
cooling circuits.
3.4 Technical data
3.4.1 Performance data
Max. operating
temperature
+90 °C
Min. operating
temperature
-10 °C
Max. operating
pressure
10 bar (1000 kPa)
Max. differential
pressure
1 bar (100 kPa)
kvs value
1.9 m 3 /h
3.4.2 Dimensions
max. 26
G1
G3/4
200
50
L
SW37
32.5
52.5
max. 75
Fig. 5: Dimensions
Item no. Circuits Length (L)
1406552 2 188 mm
1406553 3 238 mm
1406554 4 288 mm
1406555 5 338 mm
1406556 6 388 mm
1406557 7 438 mm
1406558 8 488 mm
1406559 9 538 mm
1406560 10 588 mm
1406561 11 638 mm
1406562 12 688 mm
4. Accessories and spare parts
The product is supplied with extensive
accessories (see par. 1.2 on page 17). Ball
valves and heat meters are not included in the
scope of delivery.
You can obtain spare parts and accessories
from specialist stores.
22 140655281-V01.07.2021