oventrop 138119012, Руководство по эксплуатации

Страница: 6 / 16

Technical description Valve for return layering with actuator DN 25
6
138119084-V01.07.2020
2.3.5 Risk of burns due to hot components and
surfaces
f Allow the product to cool down before working on it.
f
Wear suitable protective clothing to avoid unprotect-
ed contact with hot system components and fittings.
2.3.6 Risk of injury in case of improper work
Stored energies, angular components, protrusions
and edges both inside and outside the product may
cause injuries.
f
Before starting work, make sure that there is enough
space.
f Handle open and hard-edged components with
care.
f
Make sure that the work place is tidy and clean to
avoid accidents.
2.3.7 Availability of the operating instructions
Any person working on the product has to read and
apply these operating instructions and all other valid
documents.
The operating instructions must be available at the
installation location of the product.
f
Hand these operating instructions and all other rele-
vant documents over to the user.
3. Technical description
3.1 Design
3.1.1 Dimensions of the actuator
45
74
109
58
Illust. 2: Dimensions
of the actuator