Ovention Matchbox 360, Инструкция по установке и эксплуатации

Страница: 12 / 20

OPERATION
Form No. OVm360m-0115
12
5. When editing is complete, touch EXIT OPTIONS on the
corresponding Edit Recipe/Category screen.
a. The Recipe Dev Exit Options screen will appear.
b. Touch the desired option: EXIT aND SaVE, EXIT (without
saving), CONTINUE EDITING, or TEST COOk.
• If one of the “EXIT” options was touched, the Recipe
Development screen appears.
• To edit additional menu items, repeat the appropriate
steps of this procedure.
• If all programming is complete, touch the “up” arrow
to return to the admin mode screen.
Deleting Menu Items/Categories
1. after touching DELETE on the Recipe Development
screen, the Delete Recipe/Category screen will appear.
This screen will look like the main Recipes screen.
2. Touch the desired menu item or category to delete. The
“Delete This Entry?” window will appear.
• Touch yES to delete the
menu item or category. The
Recipe Development screen
reappears.
• Touch NO to return to the
Recipe Development screen without deleting.
3. When deleting is complete, touch the “up” arrow to return
the admin mode screen
Editing Setpoint Temperatures
Use the following procedure to edit or create the setpoint
temperature(s) available at oven startup. This procedure
requires access to password-protected screens and should be
performed by authorized personnel only.
1. From the main Recipes screen, touch the “up” arrow.
• a password keypad will appear on the touchscreen.
2. Input the password using the keypad, and touch ENTER.
• The admin mode screen will appear on the
touchscreen.
admin mode Screen
Temps Recipes Back
USB Logs Maint
ADMIN MODE ADMIN MODE 465 F 465 F
Touch to return to
Main Recipes screen.
Touch to access
Edit Setpoint Data screen.
Touch to access
Recipe Development
screen.
Touch to access
Maintenance Mode
screen.
Touch to access
USB Functions
screen.
Touch to access
Logs Detail
screen.
3. Touch TEmPS to access the Edit Setpoint Data screen.
• The oven can store up to three setpoint temperatures.
Edit Setpoint Data Screen
4. Touch the desired setpoint to edit. The “Edit Setpoint”
window will appear.
• Touch TEmP to edit the
setpoint temperature using
the keypad that appears, then
touch ENTER. The Edit
Setpoint Data screen
reappears.
• Touch NamE to edit the setpoint name using the keypad
that appears, then touch ENTER. The Edit Setpoint Data
screen reappears.
5. Repeat step 4 to edit another setpoint name/temperature.
6. When the setpoint temperature changes are complete,
touch EXIT aND SaVE to return to the admin mode screen.
• If programming is complete, touch BaCk to return to the
main Recipes screen.
Unit of Measure:
F = Fahrenheit, C = Celsius
Touch to save
and return to
Admin Mode screen.
Touch each setpoint to
edit setpoint name
and temperature.