PAGE 20
#9
After the wheels have been installed, adjust the level of the glass panel using the eccentric mechanism of the rollers. Fit the bigger Allen key in the center
of the inner roller, hold it in place, do not turn it, as it will loosen the wheel. Fit the smaller Allen key in the small hole located on the rim of the inner roller. While
holding the bigger Allen key in place turn the smaller Allen key around to move the glass panel up or down.
LEVELING THE GLASS PANEL
HELPFUL HINT!
When the eccentric backside of the wheel is in this
position, it has reached the “highest” glass position.
HELPFUL HINT!
When the eccentric backside of the wheel is in this
position, it has reached the “lowest” glass position.
A
B
A
B
