Model 1707 Integrated Amplifier User Manual
w w w . o v a t i o n h i f i d e l i t y . c o m
P a g e
11 | 19
Using the Model 100 Remote Control
Follow the instructions on the graphic below
Depress and then
release this button to
alternately power-up the
Model 1707 or place it
into standby mode
standby mode
The LED will illuminate
when transmitting a
command
Increase the volume
Decrease the volume
Depress and release this
button to cycle clockwise
through the input
sources. The
corresponding input
source indicator LED on
the front panel will
illuminate
Switch the tone control
in and out with this
button. Applies only to
those products that have
this facility.
Depressing this button
will mute the
loudspeakers but
NOT
the headphone output
socket on the front panel
Select soft roll-off filter
for 96kHz and higher
sampling rates or
standard sharp filter. For
44.1 and 48 kHz sample
rate recorded material,
this function is disabled.
This function is only
active on products fitted
with the digital input
facility. See the
respective product user
manual for further details
Select Bluetooth radio
reception. Only active
on Bluetooth equipped
products.
This button is reserved
for future use
