Ovation E-260WW IP QRG
EN
3
AC Power
This product has an auto-ranging power supply that can work with an input voltage
range of 100–240 VAC, 50/60 Hz.
Power Linking
You can link up to 7 Ovation E-260WW IP products at 120 V, 12 products at
208 V, or 13 products at 230 V. Never exceed this number. Power linking cords
can be purchased separately.
AC Plug
Connection
Wire (U.S.)
Wire (Europe)
Screw Color
AC Live
Black
Brown
Yellow/Brass
AC Neutral
White
Blue
Silver
AC Ground
Green/Yellow
Green/Yellow
Green
•
To eliminate unnecessary wear and improve its lifespan, during periods
of non-use completely disconnect the product from power via breaker
or by unplugging it.
•
When using this product in an outdoor IP65 type environment, be sure
to use IP65 (or higher) rated power cables and secure unused ports
with attached IP65 covers.
IP Rated Plug
Caps
The Ovation E-260WW IP has IP65 covers for all ports: DMX In and Out,
Seetronic Power In and Power Out.
DMX Linking
The Ovation E-260WW IP will work with a DMX controller using a 3- or 5-pin
DMX serial connection. A DMX Primer is available from
DMX Connection
The Ovation E-260WW IP uses a 3- or 5-pin DMX data connection for its DMX
personalities:
1Ch
,
2Ch
,
3Ch
, and
6Ch
. See the User Manual for information
about connecting and configuring the product for DMX operation.
When using this product in an outdoor IP65 type environment, be sure to use
IP65 (or higher) rated data cables and secure unused ports with attached IP65
covers.
Master/Slave
Connection
The Ovation E-260WW IP uses the DMX data connection for its Master/Slave
mode. See the User Manual for information about connect and configure the
product for master/slave operation.
RDM
(Remote Device
Management)
Remote Device Management, or RDM, is a standard for allowing DMX-enabled
devices to communicate bi-directionally along existing DMX cabling. Check the
DMX controller’s User Manual or with the manufacturer as not all DMX
controllers have this capability. The Ovation E-260WW IP supports RDM protocol
that allows feedback to make changes to menu map options. Download the User
Manual from
for more details.
