Oval SP493613B, Инструкция по эксплуатации

Страница: 13 / 95

Sele
9. On the
pool
place
in between
Support
Inside
NOTE!
cut out
will allow
over
Support
(See
10. Line
and
completely
and
NOTE:
Pool
inside
Selecting a
the opposite side
pool wall, carefully
place the steel wall
between the Side
Support Frame and
Inside Bottom Protector.
NOTE! There is a
out of the pool
allow the wall
over the Horizontal
Support Beam.
(See Diagram
22)
Line up the two
and nut until the
completely tighten
and that no damage
NOTE: At this
Pool Ladder to
inside and outside
a Suitable
side of the
carefully lift and
steel wall
Side
and the
Protector.
a section
pool wall that
wall to slot
Horizontal
22)
two ends of the
the full length
tighten bolts before
damage has occurred
stage, it is recommended
Ladder to place over the
outside of the Pool
Suitable Site
the pool wall then
of the join is
before you check
occurred to the
recommended
the pool wall to
Pool area's.
Site
then begin inserting
assembled. (See
check the wall is
the pool wall.
that you assemble
to gain access
inserting and hand
(See
Diagram
in the correct
assemble the
access to the
hand tightening
Diagram
23) Do not
correct place, level
each bolt
not