E-886-2-E
1. BEFORE YOU BEGIN
Every OVAL product is thoroughly tested and inspected before shipment from our factory.
When received, its appearance should be inspected for possible damage by rough handling during tran-
sit. First of all, thoroughly read the handling precautions described in this section. For topics other than
those covered in this section, refer to the respective sections of this manual.
If at any time in the future you seek our assistance, contact the nearest sales office in your area.
1.1 Confirming the Nameplate
The instrument is adjusted to individual specifi-
cations before shipment from our factory. Model
number appears on the nameplate attached to the
top of the housing.
Make sure to see that the instrument you received
conforms to the General Specifications (pages 21
through 24) and the Product Code Explanation
(pages 10 and 11).
◆
When you inquire, supply complete infor-
mation as to the product name, model
number, product number, ratings, and
other pertinent information.
1.2 Transportation Precautions
(1) In order to safeguard against damage during transit, transport your instrument to the installation loca-
tion in the original package used for shipment from the factory if possible.
(2) Use care to avoid impact shocks to the instrument during transit.
1.3 Storage Precautions
If the instrument upon receipt is to be stored for extended periods of time before installation, unexpected
problems could arise. If such is the case, the following considerations should be taken:
(1) The instrument can best be stored in the original package used for transit from the factory.
(2) The place of storage should meet the following requirements:
☆
Free from rain and water
☆
Free from vibration and impact shocks
☆
With minimal temperature and humidity variation (around 25
°
C and 65% R.H.)
※
EL4001 is the
generic desig-
nation of the
EL4001 series
computers.
Fig. 1.1 Nameplate Location
Nameplate
(model number)
※
