background image

PATIO QUARTZ HEATER

YP-2000B (842-123/842-123V01)

1-WARNINGS

This electrical appliance complies with technical safety and electromagnetic

compatibility standards.

Never touch your heater when in operation (risk of burns).

Never touch it with wet hands.

Never rotate the heating part of the appliance during operation. To change the

tit angle of the heating part, we advise you to wait for 15 minutes after the appliance

has been switched off.

Never place anything on your heater's safety guard as this may cause

overheating (e.g. towels)

Never use your appliance to dry washing.

Although the heating element has stopped glowing, it may still be live and

potentially dangerous. Check that the selection indicator is in position off

before taking any action.

Switch off your appliance:

- After use

- In the event of malfunction

- Before cleaning it.

Never operate your appliance if it has fallen over.

Never dismantle your appliance. An incorrectly repaired appliance maybe dangerous
to the user. If you encounter any problems, please take it to one of the Approved
Service Centers in our customer service network
The warranty will be void in the event of damage arising from improper use.

Do not use this heater in the immediate surrounding of a bath, a shower or a

swimming pool.

Содержание YP-2000B








Отзывы: