Outsunny 845-493, Руководство по сборке и инструкция

Страница: 7 / 21

7
Hedge trimmer Cutting length 120mm
Grass shear Cutting width 80mm
Battery capacity 1.3Ah
Charging time 5Hours
Declaration of the noise and vibration values for Grass Shear & Hedge Trimmer determined according to
EN 60745-1, EN 60745-2-15 and EN ISO 10517, EN 60335-1 and FprEN 60335-2-94
A-weighted sound pressure level L
pA
80 dB(A)
Uncertainty K
pA
3 dB
A-weighted sound power level L
WA
83 dB(A)
Uncertainty K
WA
3 dB
Vibration a
h
1.62 m/s 2
Uncertainty K 1.5 m/s 2
Wear hearing protection while operating the power tool.
The declared vibration total value has been measured in accordance with a standard test method and may be used for
comparing one tool with another.
The declared vibration total value may also be used in a preliminary assessment of exposure.
Warning
The vibration emission during actual use of the power tool can differ from the declared total value depending on the
ways in which the tool is used.
There is the need to identify safety measures to protect the operator that are based on an estimation of exposure in the
actual conditions of use (taking account of all parts of the operating cycle such as the times when the tool is switched
off and when it is running idle in addition to the trigger time).
●
SAFETY INSTRUCTIONS
Please read these instructions before operating this product and save these instructions.
For safe operation:
1. Keep children and animals away from working area.
2. Switch on motor only when the hands and feet are away from the cutting blades.
3. Use only the manufactures recommended replacement parts and accessories.
4. When not in use, tools and batteries should be stored separately in a dry, high or locked up place, out of reach of
children. Ensure that battery terminals cannot be short-circuited by other metal parts such as screws, nails, etc.
5. Do not use excessive pressure during operation. It will do the job better and safer at the rate for which it was
intended.
6. Dress properly
Do not wear loose clothing or jewelry; they can be caught in moving parts.
Wear stout shoes while using the grass shear. Wear protecting hair covering to contain long hair.
7. Maintain tools with care
Keep cutting tools sharp and clean for better and safer performance. Follow instructions for lubrication and
changing accessories.
8. Disconnect tools