background image

1.General warnings

Read all the instructions and warnings carefully before using this product. 

Failure to follow warnings and instructions can result in severe injury, death, 

or property damage. Before installation, check if all accessories are complete 

and without damage. If not, contact customer service. Keep these instructions 

in a safe place for future reference. Use this product with its original parts 

only. cannot be held responsible in the event of damage or injury due to incor-

rect use of this product. The information contained in this manual is believed 

to be correct at the time of printing. However, reserve the right to change or 

modify any of the specifications without notice or obligation to update existing 

units. Repairs should only be carried out by a specialist or a professional and 

experienced technician. Never attempt to repair the product yourself.

2 Warnings and personal safety

• Read the operating instructions before using the product.

• Important safety instructions. It is important for the safety of persons to 

follow these Instructions, since incorrect installation can lead to severe injury. 

Save these instructions.

• Attention: Risk of injury! When repairing, altering, disassembling and dispos-

ing of the shading system, the parts under tension (e.g. folding-arms, counter 

tension systems) have to be relaxed completely or secured beforehand. A 

specialist should be commissioned for this!

• Do not use the awning if it is damaged and needs repair or adjustment.

• The side awning must be retracted if the wind speed reaches higher than 

28km/h.

• The side awning must be retracted in the case of adverse weather condi-

tions such as heavy rain and snow.

• The operation in frosty conditions may damage the product.

• Attention: Risk of fire! Do not use any barbecues, heaters,

-12-

Содержание 840-236













Отзывы: