Outsunny 840-232, Руководство по сборке и инструкция

Страница: 6 / 8

08
07
7.Make the left bottom hole of stand column and the hole on the floor alignment, and
tighten them with M8x75 hexagon tapping bolt.
1.Keep the front bar upright, hold the handle and pull it over the column. Hold the
handle tightly, rotate it 90 degrees, align the side of the front rod with the groove of
the column and put it in, so that the main shaft of the handle can be clamped into the
groove. See the figure below for details
CORRECT USE