Outspot MOL-HA-DRY01, Руководство пользователя

Страница: 10 / 44

Place a pair of pants well over the airbag, select the time you want to dry the pants
with the timer and select if you want cold or hot air blown through the airbag using
the cold-hot selector .
5) Using the shoes dryer (optional):
Fit the shoes dryer airbag onto the air outlet vent . Fit the ends into the shoes.
Select the time you want to dry the shoes with the timer and select if you want
cold or hot air blown through the airbag using the cold-hot selector .
6) To disassemble the device, follow the assembly steps above in reverse order.
5) CLEANING AND MAINTENANCE
Warning
Before cleaning the device, always switch it OFF by turning the timer to the OFF
position, then disconnect it from the mains electricity supply and allow it to cool
down fully.
Cleaning
• Never use aggressive or abrasive cleaning materials, cleaning alcohol or sharp
objects like hard brushes or knives.
• Clean the exterior of the casing, the accessories and the power cord with a damp
cloth.
• Then dry it with a dry cloth.
Note! The device CANNOT be immersed in water.
Note! Never leave the device working longer than 180 minutes continuously.
3
3
3
4
4
6
EN08