Outsight Creamsource Micro+C, Руководство пользователя

Страница: 31 / 40

29
Chapter 9: DMX Control
Due to the water resistant nature of the Creamsource Micro+C, it does not have
full size XLR DMX connectors. Instead, DMX is accessible by using a breakout
cable plugged into the Accessory socket, which brings the signals out to 5 pin
XLR connectors. Part number for the breakout cable is:
CSU-DMX-Y
When a valid DMX signal is present, the manual controls for the unit are disabled.
These are restored one second after loss of DMX signal.
The DMX address can be changed under
MENU->DMX SETUP. Please refer to
our separate DMX table guide for detailed information.
Termination
As with all DMX installations, the last unit in the chain should be terminated.
This can be done through the menu system, by selecting
MENU->DMX SETUP
->DMX Terminated.