Outsight Creamsource Micro+C, Руководство пользователя

Страница: 26 / 40

24
7.5 TIMED FLASH
Used to create flashes of a defined duration, similar to a Studio Strobe light. A
modelling level can also be set.
The flash can be triggered by pressing the FLASH button, or if ‘External Triggering’
is enabled it can be triggered from an external source such as a camera hot shoe.
SETTING RANGE DESCRIPTION
BRIGHTNESS 0-100% Modeling light output level
FLASH LEVEL 0-100% Light output when FLASH triggered
FLASH TEMP 1/5
th
-
1/5000 th sec
Duration the light is flashed ON for
7.6 FLASH FRAMES
Use this mode to create flashes tightly synchronised to the camera shutter. Must
be used in conjunction with a sync source such as Creamsource FlashBandit.
The duration of the flash ON and OFF is specified in Frames - e.g. Flash 1 frame
ON, followed by 3 frames OFF, repeat.
SETTING RANGE DESCRIPTION
BRIGHTNESS 0-100% Maximum flash brightness
FRAMES OFF 1-255 No. of frames to flash OFF (i.e Skip)
FRAMES ON 1-255 No. of frames to flash ON
Note: Calibrate Sync mode should be run first to make sure fixture is aligned with
the camera shutter to prevent ‘torn frames’ on cameras with rolling shutter. See
next chapter.
7.7 COLOUR CYCLE
This mode cycles through all available hue’s, at maximum saturation. The speed
may be adjusted.
SETTING RANGE DESCRIPTION
BRIGHTNESS 0-100% Light output level
SPEED 0-100 Speed of effect