OUTSET Lanx HD, Руководство пользователя

Страница: 10 / 20

10
4.8 Tare
This function allows the user to acquire the tare of the vehicle. This operation must
be carried out with the vehicle completely empty and on a flat surface (with the
handbrake released). It’s recommended that the tare be acquired with half a tank of
fuel in the vehicle. Perform this operation only when the values displayed in Net
total kg /- 300kg.
•
Press the Tare button to display:
•
Press OK to confirm and to effectively memorize the tare
•
Press the Functions button to cancel the operation.
4.9 Materials
This function allows the user to select the different type of materials.
•
Press the Materials button to display:
•
Press the and buttons to scroll the different materials
•
Press OK to confirm the material and to display the weighing screen.
The Setup functions represent the main menu of the system and it is necessary to
enter a protective PIN CODE to unlock the functions. (See the “Calibration manual”)
They can be used to perform the calibration, set the load limits for external alarms,
enter the weighing delay, modify the sensor filters, etc. Press the Functions button
and scroll with the and buttons until the following appears on the display:
•
Press the OK button to enter the various menus
5.1 Weighing delay
This function allows to manage the time necessary to stabilize the lifting pressure.
The parameter has to be setup at minimum 1 second.
Enter the Setup menu as described above and press and until the following
appears on the display:
•
Press the OK button and use the and buttons to select the time (seconds),
then press OK to confirm.
General
General General
General
SETUP
SETUP SETUP
SETUP
TARE TARE TARE TARE
Confirm ? Confirm ? Confirm ? Confirm ?
MATERIALS SEL.
MATERIALS SEL. MATERIALS SEL.
MATERIALS SEL.
SAND SAND SAND SAND
5 Setup Functions (PIN CODE unlock)
Setup Setup Setup Setup
WEIGHING DELAY WEIGHING DELAY WEIGHING DELAY WEIGHING DELAY