2
2. General Features
2.1 Buzzer
The buzzer of the scanner beeps differently to indicate
various operating conditions.
•
Power On Beep
: The CCD scanner will issue a
long beep to indicate a successful power on.
•
Good Read Beep
: There are four volume levels
and four beeping tones (frequencies) that user can
select from when there is a good read. The available
options are listed below.
Volume : Maximum/Loud/Medium/Minimum
Frequency : 8 / 4 / 2 / 1 kHz
•
Error Beep
: The scanner will issue a long beep
with a low tone to indicate errors.
•
Enter / Exit Configuration Beep
: The scanner
will issue 6 beeps upon entering / exiting the
configuration mode.
•
Setup Beep
: In configuration mode, the scanner
will normally beep twi ce when a setup barcode is
read. If the particular setup parameter needs more
than one read, the scanner will only issue a short
beep to indicate that there are more setup barcodes
needed to complete the current parameter setting.
2.2 Indicator
There is a dual color indicator on top of the scanner.
Normally it is off, and it will turn red when there is a
good read. The indicator will be green when the
scanner is in configuration mode.
2.3 Scan Modes
There are eight scan modes supported by the CCD
scanner. User can choose the desired scan mode
depending on the application requirements. But, if the
scanner is a switch-less scanner, only Continuous
mode or Testing mode can be selected (other scan
modes involve trigger switch interaction). The
supported scan modes are described below.
