4. 5.
3.
2.
1.
1. Push the FUNCTION SWITCH
j
to the right to turn on
the CD-Player. The POWER INDICATOR
d
will be lit.
2. Open the CD DOOR by pushing OPEN/CLOSE
e
, put
the CD (silk-printing side up) on the principle axis of
the mechanism and close the CD door.
3. On LCD DISPLAY
s
the number of tracks on CD will be
shown.
4. Press PLAY/ PAUSE
w
to start the playback.
5. Press PLAY/ PAUSE again you can pause playback, to
press again to resume playback.
6. If you want to stop the playback, just press the CD
STOP button
q
.
7. During the playback, press the
PREVIOUS/ FAST
BACKWARD button
6
, it will skip to the beginning
position, continuously press this button for two times,
you can skip to the previous song and to press the
NEXT/ FAST FORWARD button
5
, you can skip to the
next song.
8. During the playback, press the PREVIOUS/ FAST
BACKWARD button
6
without loosing and the
playback point will fast run back. When it reaches the
position you require, let loose the button and the
playback starts from reached point. Press the NEXT/
FAST FORWARD button
5
without loosing and the
playback point will fast run forward until it reaches the
position you require. Let loose the button and the
playback starts from reached point.
9. During the playback mode, press the REPEAT button
4
, then it will repeat the playback for the current
song. Press the button for second time, it will repeat
playback for the whole disc. Press the button for the
third time, then it will random play the disc. When you
press the button for the fourth time, then you can
cancel the repeat operation.
10. During the stop or playback mode you can program
playback for the disc. Press the PROGRAM button
9
and then press the
NEXT/ FAST FORWARD button
5
or the
PREVIOUS/ FAST BACKWARD button
6
to select
your desired song number. Then press the PROGRAM
button
9
again to save it. Do it in the same way until
you finish programming all the songs you require. To
press the
PLAY/ PAUSE button
w
, it will start playback
as per the programmed songs order. The LCD will show
PROG. You can program at most 20 songs. When it is
not in CD playback mode, the previous program will be
automatically cancelled.
CD PLAYBACK
6.
7. 8.
9.
10.
LISTENING TO THE TAPE
1. Set the FUNCTION switch
j
to TAPE position to select
tape playback.
2. Press STOP/OPEN button
y
to open the cassette door.
Insert prerecorded tape and close the cassette door
a
.
3. Press PLAY button
o
to start the playback, adjust the
VOLUME control
7
to the desired listening level.
4. Press the PAUSE button
t
to stop playback and resume
after pressing the button again.
5. Press FAST FORWARD
u
or BACKWARD button
i
to
fast forward or backward the tape. Press STOP/OPEN
button
y
and it will stop working.
6. The playback will automatically stop at the end of the
tape. If you want to stop the tape in the halfway, press
the STOP/OPEN button
y
.
26
MAINTENANCE
CLEANING CD
If the CD skips or will not play , the disc may need
cleaning. Before playing, wipe the disc from the centre
out with a cleaning cloth. Do not touch the data surface
(the silver surface) to prevent sound deadlock during
playback. Do not write or stick label on the disc. After
playing the CD, store the disc in its case.
CLEANING THE CD LENS
If the CD lens is dusty, clean it with a brush-blower. Blow
several times on the lens and remove the dust
with the brush. Finger prints may be
removed with a cotton swab moistened
with alcohol.
CLEANING THE UNIT
Do not use volatile chemicals on this unit. Clean by
lightly wiping with a soft cloth.
IMPORTANT NOTE
If an abnormal display indication or an operating problem occurs, disconnect the AC power cord and remove the
batteries. Wait at least 5 seconds, then reconnect the AC power cord or reinstall the batteries.
WARNING
Should the CD door be opened before the reading of the CD completed, a jamming noise may occur. This is
resolved by closing the CD door.