⑦
Push the function switch
j
to the left to turn on the radio.
Then press the band switch to left or right to select
between AM and FM as you desired. Now adjust the Radio
tuning control
r
and look at the band window
8
where the
red dial pointer is switching between the frequencies. Take
the frequency you like and enjoy listening to the radio.
During the AM band receiving, please adjust the unit
direction to get perfect receiving result and during the FM
band receiving, please draw out FM antenna
1
and adjust
the antenna direction to get the perfect receiving result.
26
LISTENING TO THE RADIO
The VOLUME control
7
may be adjusted to the left (MIN),
it will reduce the volume. If adjusted to the right (MAX), it
will level up the volume.
ADJUSTING THE SOUND
You can use the earphone to listen to the program played
by the apparatus and it is only needed to insert the
earphone to the earphone jack
2
At this time connected to the jack, the speaker inside the
apparatus will be automatically disconnected.
②
EARPHONE CONNECTION
TURN ON / OFF THE SYSTEM
USING BATTERIES
Disconnect the AC power cord from the AC socket
h
of the
unit. Battery power is cut automatically by the cord while it
is connected. Open the battery compartment backward
g
and insert 8 pieces (C/ UM-2 batteries) batteries to the
direction shown by the diagram inside the compartment.
Now close the compartment. Replace the batteries when all
the broadcast sounds change into noise, the sound is
diminishing and starting to be with distortion, the magnetic
tape is even motionless or the CD is incapable to read a disc.
NOTE:
Do not mix the batteries of different types, or use the old
battery and the new battery together. Never charge or heat
or break the battery. When taking out of the battery when it
is exhausted, if it is found out that the battery is with
leakage, the battery should be taken out of the compart
-
ment and the leaked liquid should be thoroughly wiped out.
24
POWER SUPPLY
to AC socket
to AC outlet
AC POWER OPERATION
Insert one end of the AC power cord into input jack of AC
power
h
on the apparatus, the other end into AC outlet.
(You can only use the AC power cord provided together
with the Radio. Using other types of power cord may cause
fire or electric shock.)
25
26
Radio:
After the apparatus is connected to the power, the power
supply switch needs to be pushed to the left side (RADIO).
Now the Radio is “ON” and the power indicator
d
will be lit.
CD:
After the apparatus is connected to the power, the power
supply switch needs to be pushed to the right side (CD). Now
the CD-Player is “ON” and the power indicator
d
will be lit.
TAPE/ OFF:
When the power supply switch is pushed to the middle
(TAPE/ OFF), cutting originally the power supply of the
player and the power indicator
d
will not be lit at this
time, but you can of course use the cassette-player to push
the play button
o
.
Batteries not included!