Outline Mantas 28, Руководство по монтажу

Страница: 7 / 28

OUTLINE S.R.L.
Via Leonardo da Vinci, 56
25020 Flero (Brescia) Italy
Tel.: +39 030.3581341
Fax +39 030.3580431
info@outline.it
www.outline.it
7
2.3. INTEGRATED HARDWARE OF LINE ARRAY ELEMENTS
Similar to the frame bar hardware, the Superfly /
Mantas28 elements also have a simple but very effi-
cient hardware structure. These hardware elements
are made of ultra-light aluminium and are designed,
approved and certified to support the established lo-
ads.
The sliding bars , inserted in the rails on the back
of the cabinets, are easy to adjust and allow a vertical
inclination from 0 ° to 7.5 ° with 0.5 ° steps (with the
addition of the 0.25 ° angle) between the elements.
In the lower part (fig. 1) of each rail there are 4 holes
for locking pins corresponding to the “groups” of an-
gles illustrated next to the rail.
This allows a very precise pointing choice which ad-
dresses any type of need. Further details on their use
in chapter 4.
In the upper part (figure 2), each rail receives the bar
of the previous element or of the frame bar, presen-
ting a hole (“Default”) dedicated to all the selectable
degrees with the exception of the 0.25 ° angle, for whi-
ch the dedicated hole (called “0.25 ° ONLY”) should be
used. For the connection to the frame bar the “Defau-
lt” hole is used.
figure 1
figure 2