Outline Mantas 28, Руководство по монтажу

Страница: 22 / 28

OUTLINE S.R.L.
Via Leonardo da Vinci, 56
25020 Flero (Brescia) Italy
Tel.: +39 030.3581341
Fax +39 030.3580431
info@outline.it
www.outline.it
22
4.6. GROUND STACK CONFIGURATION
For a stack array configuration it is necessary to
follow a procedure where the frame bar and the array
elements are literally upside down and their maneu-
verability is reduced. Always keeping in mind the in-
dications given by the OpenArray2 software, proceed
as follows:
1. prepare the frame bar with the released har-
dware and looking upwards (figure 40);
2. insert the “foot 01” accessory (figure 41) in the
rear holes (figure 42) and adjust its height. In
case the chosen element is Mantas 28, it will
be however possible to choose both positions
for the feet (front and rear). It is not possible to
choose the front position when using Superfly
(the first element should be aimed downwards).
3. posizionare il frame montato a terra, predispo-
nendo il puntamento orizzontale prima di col-
locare qualsiasi elemento che ne renderebbe
difficile lo spostamento (figura 43);
figure 40
figure 41
figure 42
figure 43