Outland Technology UWS-3310, Руководство по эксплуатации

Страница: 30 / 31

19
) Residue image
n the screen for an extended period of time, it may be
liquid
idue
e
er for your LCD monitor.
7) O
to check is the screen resolution. Usually “Out of
screen resolution as the following steps for Windows: (Assumed that the
o
ode (F8) [repeatedly] at startup.
T
s
d
Select “
C
h
ick “OK” on the Display Properties window.
r
6
→
If an image remains o
imprinted in the screen and leave a residue image. It is characteristic of
crystal and is not malfunction or deterioration of the liquid crystal. The res
image will disappear after a period of time. It is recommended to set up th
screen sav
ut of Rang
→
The first thing you need
Range” is caused by improper resolution setting. You can recover the proper
ptimal resolution and frequency setting is 800x600@ 60Hz.)
Boot the computer into VGA M
Go to “ Control Panel ”, double click on “ Display ”, click on the SETTINGS
TAB, and click on the ADVANCED button.
hen Click on the Adapter TAB, click “ List All Modes ” and change the
creen resolution to 800x600. (You can select 16 bit or 32 bit color which
epends on your video card capability.)
800 by 600, High Color (16 bit), Default Refresh ”
lick on the “OK ” and “ APPLY” .
After clicking the APPLY button, a message will be displayed “Your desktop
as been reconfigured. Do you want to keep these settings?”
Click “ Yes ” and “OK ”. Then cl
Restart your PC
After you restart, go back to “List All Modes” to adjust your screen refresh
ate to 60 Hertz.