Outland Technology UWS-3310, Руководство по эксплуатации

Страница: 24 / 31

13
Insta ng the Monitor lli
This m tor is equipped with an auto sensing DC power adapter for voltage
ranges of 100-240VAC, 60/50Hz. Follow these steps to install the monitor:
1. Before you connect the cables, made sure that the monitor and the system
unit power switches are off.
2.
3. C e AC/DC power cord to the DC jack.
4. Connect the power cable.
4. Display Modes
Micro-controller
oni
onnect th
Features
Th micro-controller automatically detects the video board installed in your
system. When you turn on the monitor, the micro-controller checks the
display mode memory stored in the user setting area of the video board, and
then the factory presetting area. It then adjusts to the proper display mode.
The micro-controller has the memory capacity to store different display
modes, including timing formats and display-settings.
Factory Presetting Area
e
There are some preferred display modes preset in the micro-controller. These
isplay modes are preset at the factory and include the most popular display
available. The micro-controller searches for a proper display
o find a proper display mode in the user setting
d
modes currently
is area if it fails t mode in th
area.