Owner & Safety Manual
D.863.000.V4
En-7
OUTLAND FIREBOWL
®
CYPRESS OWNER & SAFETY MANUAL
If there are no flames present,
as demonstrated in the image
to the left, the appliance is likely
not burning. If this is the case,
IMMEDIATELY turn the appliance
valve to the “off” position if it is
not already and repeat the ignition
procedure as outlined in Section 2.
Upon igniting the appliance,
visually verify that the burner is
indeed burning as demonstrated
in the image to the left. The
presence of flames will confirm
that the burner is burning.
Periodically check that the burner
flame is present during operation
by visually inspecting the burner to ensure the presence of flames.
SECTION 3:
PERIODIC INSPECTION OF BURNER FLAMES
1 Keep your Firebowl out of the rain and store it in a dry place.
2
This device has been engineered to provide the maximum
amount of heat and comfort. If you experience any signs of
your propane cylinder ‘freezing off’ or start to experience
lower flames than usual, please simply turn the burner control
setting to low for 5–10 minutes, or replace the cylinder with a
full one.
3
Ensure that you clean the bowl of your Outland Firebowl
®
after
every use to keep it looking GREAT. Simply wipe the outer edge
of the Firebowl with a damp paper towel or cloth to remove any
combustion particulates.
4
Ensure to keep the lid on when storing your Outland Firebowl
®
in
order to protect it from the elements.
SECTION 5:
FIREBOWL MAINTENANCE
Your Outland Firebowl
®
requires periodic maintenance to keep it in good running order. Follow the steps below to ensure your appliance
will provide you with the best possible performance:
STEP 1
Turn cylinder valve to the “Closed” position.
STEP 2
Turn appliance valve to the “Off” position by pushing and turning
knob clockwise.
STEP 3
Allow unit to cool for at least five (5) minutes before relighting.
SECTION 4:
EXTINGUISHING THE APPLIANCE
WARNING:
The rocks are HOT!
WARNING:
Don’t burn yourself! Do not touch or handle the firebowl when
hot! To avoid injury always allow the firebowl to cool down for
at least 30 minutes before moving and handling the appliance.
Never handle rocks which have not been allowed to cool from
exposure to flame. Never attempt to rearrange rocks while unit
is ignited.