Thank you for purchasing a superior quality
Outer Limits tent. This trouble shooting guide
is designed to give you years of fun &
enjoyment from your camping equipment.
HELPFUL HINTS GUIDE
Condensation
- this is caused by lower temperatures on the outside of the tent combined
with body heat on the inside of the tent. When this occurs, avoid touching walls to reduce contact
leakage. Leaving the doors and windows open will reduce moisture condensation.
Seam leakage
- all Outer Limits tents are manufactured by expert machinists.
However, seepage may occur in the seams through the needle holes created in the sewing process.
This is normal and can be corrected by applying a generous amount of seam sealer or wax on the
inside of the seams. Seam sealer is available at all retail camping specialists.
Mildew
- to avoid mildew, never put your tent away wet or damp. However, if mildew occurs, use a
soft bristle brush or sponge with mild detergent to clean. Let the tent dry in the sunlight and re-apply
seam sealer compound on the inside of the seams.
Repairing a tear
- for small tears, use a self-adhesive patch kit. We recommend a canvas
or awning repairer for larger tears.
Faulty zipper
- all our tents are manufactured with zippers which, if the zipper separates, you
can fix the zipper by moving the slider to the beginning of the zipper tape and reworking the zipper. If
this doesn’t work, we recommend you visit a canvas or awning repairer in your area.
Fading fabric
- do not leave your tent set up in direct sunlight longer than is necessary. If left
in sunlight for prolonged periods of time, fabric will fade and weaken.
Floor condensation
- a ground sheet under the tent prevents the floor from feeling damp
and helps prolong its life. The ground sheet should be smaller than the tent’s floor to prevent rain
from running under the tent.
Shock cord failure
- spring and elastic shock cord is provided to assist tent assembly. Age,
over stretching and mishandling pole assembly will cause elastic failure. Elastic shock cord is delicate
and should be handled with care.
Removing pegs
- pegs should be pulled with another peg, hammer or a peg puller, never
by pulling on the tent. Avoid pegging tent so tight that it stretches the fabric. Overstretching may
cause peg loops to tear.
