Outdoors RV ORV Trail Series, Руководство пользователя

Страница: 23 / 28

20
Ramp Model Features
Patio Set-up Procedure
1. Refer to set-up photos at the end of this procedure for additional reference.
2. Before patio kit is set-up, the RV must be leveled with all stabilizer jacks in contact with the
ground.
3. Following the procedures outlined in '
Loading Ramp Operation'
and the
'Loading Procedure'
section, unload any vehicles or equipment transported in the cargo area.
4. Locate and ready the ramp support cables at each side of the ramp opening on the inside. They
may be tucked between the patio doors and railings.
5. Raise or lower ramp to its near horizontal position, attach end of ramp support cable to the clevis
pin bracket at both side of the ramp. Do this on each side of the ramp. Ensure that the clevis pin
safety clip is securely latched (Fig 1). Adjust cables as necessary to provide a near level ramp.
Ramp does not need to be perfectly level (Fig 2).
6. Locate side step assembly and bring into place. This may require two people for ease of set-up.
Step must latch securely into bracket set located near the upper end of the ramp door on the
passenger side. Ensure that the step is positively latched into bracket set. Unlatch step/ramp
support leg and lock into upright position. Adjust support leg and step feet as necessary to
provide a stable and near level (step tread) angle. Step assembly does not need to be perfectly
level (Fig 3-6). Fold open hand railing by releasing its latch on the underneath side of handrail
upper tube (Fig 15).
7. From atop the ramp you will now unfold and extend the patio railing and latch each keeper leg
into position. Ensure that each keeper leg is securely latched into place before allowing people
on the ramp patio. The passenger side patio railing contains a sliding guard rail that extends
rearward across the path of the side step to provide a security gate for small children. This gate
can be latched against the rear railing (Fig 7-14).
8. If you choose, you may now extend the rear awning (if equipped) to complete set-up of the patio
feature.
Patio Set-up Quick Reference
The following pictures on the next few pages will provide a quick-reference for patio set-up.
The warning label to the right
is located along the door side
inner edge of the ramp. Failure
to follow this warning may
result in loss of warranty
coverage.