Outdoors RV ORV Trail Series Скачать руководство пользователя страница 12 | Manualshive

Страница: 12 / 28

background image

9

Ramp Model Features

Fuel Transfer System Operation

1.

Lower the RV tongue jack to the ground. This will help to reduce the possibility of static
discharge while refueling.

2.

Close any vents and/or windows in the vicinity of the fueling station to prevent fuel vapor from
entering the RV.

3.

Turn the fuel transfer pump switch ON. This will provide power to the fuel pump. It also sets an
internal timer that allows the pump to operate up to 5 minutes. When the pump stops, it will be
necessary to reset the pump switch by turning it off then back on to allow an additional 5 minutes
of run time.

4.

Remove the fuel hose and nozzle from its compartment.

5.

Place the nozzle into the equipment fuel filler and squeeze the handle to allow fuel to flow. Be
careful not to overfill the equipment fuel tank.

6.

When finished, release the nozzle handle and return the nozzle and hose to its compartment and
shut off the pump switch. Wipe up any spilled fuel.

7.

Lock the fuel transfer nozzle compartment door to prevent unauthorized use. The nozzle
compartment must be locked at all times when not dispensing fuel.

It is recommended that the fuel pump be operated at least once a month to keep the system functioning
properly.

GASOLINE GENERATOR

Your ramp model RV includes a 4.0 KW (4000 watts) gasoline generator intended for use when
camping 'off-grid' or remote areas where no 120 volt service is available. Gasoline fuel for the generator
is supplied from the On-Board Fuel Station. See operating manual on DVD included in your owner
information packet for specific operation and maintenance.

QUICK ACCESS HOME DEFENSE SAFE

ELECTRIC BUNK LIFT SYSTEM

The electric bunk lift system provides a sleeping and seating arrangement that can be raised out of the
way for convenient transporting of ATV's or other equipment and lowered again for use when needed.
The components of the bunk lift system include the sofa(s), upper bunk platform with mattress and bunk
access ladder. There are several sub-components of each which will be discussed in the following
paragraphs. Please refer to additional user literature included in your owner information packet.

See additional literature supplied
in your owner information packet
for operation of the home defense
safe.

«
...
10
11
12
13
14
...
»

Содержание ORV Trail Series





























Отзывы:

Нет отзывов

Похожие инструкции для ORV Trail Series

Бренд: Grand Design Страницы: 190

Stirling LX MK3

Бренд: Ezytrail Страницы: 62

Бренд: Jayco Страницы: 165

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды