8
Outdoor Revolution Awnings are distributed by:
Outdoor Revolution Ltd
www.outdoor-revolution.com
Problem
Reason
Solution
The Air Tube keeps
deflating after removing
the pump.
The Dynamic Speed Valve
quick release button hasn’t
been pressed back out.
Press the quick release
button back out to shut
the valve.
The awning is leaking.
Usually ‘leaking’ is actually
condensation which forms
on the inside of the product.
Open all the Vortex
Vents in the awning to
help increase air circula-
tion and help reduce
condensation.
Trouble-Shooting.
In the event of a puncture.
If you have a small puncture in your Air Frame Tube you can easily re-
pair it using a standard puncture repair kit.
To remove the Air Frame Tube - deflate the tube and then unzip the
two protective sleeves over the tube and pull the Air Tube out. Do not
unzip the sleeves whilst the tube is inflated.
Locate the puncture repair the puncture on the Air Frame Bladder.
Place the Air Tube back in to the sleeves in the correct place with the
valves in the valve hole. Make sure the Tube is straight and not twisted.
Zip the two sleeves back up fully.
Inflate the AirFrame Tube again, ensuring that the puncture has now
been repaired.
If this process doesn't work you may have to buy a new bladder.
**Spare AirFrame Bladders can be bought to replace damaged ones.
Visit the Spares Section at www.outdoor-revolution.com or contact us on
01924 455313**
**Awnings will not be replaced because of damaged bladders**
