4
Set-Up
Set-Up
Setting up for use with liquid propane (LP)
1 Place the fire pit in a desired location
page 5
2 Connect the propane tank
page 6
3 Perform a leak test
page 10
4 Place the decorative stone or decorative fire objects
page 11
5 Insert the battery in the igniter
Setting up for use with natural gas (NG)
1 Place the fire pit in a desired location
page 5
2 Connect to an NG gas source
page 9
3 Convert the orifice to NG
page 12
4 Perform a leak test
page 10
5 Place the decorative stone or decorative fire objects
page 11
6 Insert the battery in the igniter
page 11
You are responsible for ensuring that a natural gas line (if required) is
installed and safe for use. We recommend that a licensed contractor
install your fire pit.
Installation must conform to local codes, or in the absence of local codes,
with either the National Fuel Gas Code, ANSI Z223.1 / NFPA54, Natural
Gas and Propane Installation Code, CSA B149.1, or Propane Storage and
Handling Code, B149.2), as applicable.
