2.
Lift up a completed
Post/Girder section slowly and
carefully. Make sure Side
Girders are facing outward.
3.
Position bottom of Posts in your
existing Post Hardware.
4.
Secure Post to Post Hardware with appropriate
hardware such as lag bolts or a sufficient number
of screws.
Post
Hardware
Lag Bolts
5.
Locate End
Girder (H) and lift
into
position between
both Side Girders.
The End Girder has
a deep notch facing
up on each end.
Lift, position and attach the
second Post/ Side Girder
section to post hardware.
Deep Notch facing Up.
Outdoor Living Today www.outdoorlivingtoday.com [email protected]
Page 4
Side Girder to outside
E
Important:
you will need the help
of 2-3 people while lifting and
positioning the completed Post /
Side Girder Sections into place.
