37.
Attach
Horizontal Wall Extendor Brace
to Framing of Top and Bottom walls 1/2” below wall
framing. Start with High Wall Side and attach 71 1/2” and 60” long pieces with 10 - 1 1/2” screws
per side. Alternate screws into both pieces of framing. Complete Front and Rear walls (60” and
30” l pieces) using the same alignment.
39.
When Gable wall is positioned correctly, tack in place with 2 - 2” screws. Adjustment to Gable may
be required in
Steps 48
.Further secure Gable in
Step 48
with 6 - 2” screws. Complete other Gable Wall.
38.
Lift up
Gable Wall
and place on top of rear wall. Once again, gable with 33 3/4” degree cut will be
aligned on high wall side. Slide Gable Wall side to side and use a straight edge to line up angled framing of
gable with Top Plates and Wall. There is some tolerance, try for best fit on both sides.
6- 2” screws
1/2” below framing
Straight
Edge
Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [email protected]
Page 15