7
After installing igniter and making gas connections, verify that
they are tight and that no leaks are present using a solution of
soapy water or a commercially available leak-check solution.
Glass Installation
1.
Scatter the included glass beads evenly on to the
burner surface using all of the beads that came
with the fire pit.
DO NOT BURN WITHOUT GLASS
OR OTHER DECORATIVE MEDIA PRESENT.
2.
With concrete top on base, locate 3 glass pieces
that were included with your fire pit. Attach
bumper pads to textured side of glass pieces.
Attach 1 bumper bad to each of the corners, of
each glass piece. Set glass pieces into the 3 pre-
cut openings, with silicon pads facing downward.
Burner cover with finger holes will sit on top of
burner pan, the separate 2 solid glass covers will
sit in outside openings.
Position Your Tank
(if applicable)
