6
Igniter Installation
1.
Make sure the valve is in the OFF
position before beginning.
2.
Install sparker as shown, using an
AAA battery (not included). Negative
end should be placed inside the CF-
SPARKER, positive end on the outside
of CF-SPARKER.
Sparker will not operate correctly without an ignition
and
ground
wire attached.
Plug both
BLACK
wires hanging from the burner into
the back of the sparker box. If an orange wire is
present, do not use it. Orange wire is for automatic
ignition system add-on only.
Test system by pushing the button on the igniter.
Consult the troubleshooting section if spark is weak,
intermittent, or not present.
