5
Gas Connections
Read and understand your Crystal Fire Plus owner’s manual before beginning burner
hookups or using the device. Do not use Teflon tape or pipe dope on flare fittings.
See Crystal Fire Plus instructions for burner installation.
•
All gas connections were completed at the factory.
Check all connections for leaks. If needed, tighten connection with
2 wrenches and re-check for leaks.
Attach burner valve to control panel with provided screws as shown
below. Ensure sparker box is installed before this step.
5.
Supercast Top Placement
Caution:
Top is heavy, two people are required to lift and set into place.
•
Remove burner cover before lifting the top to avoid
damage to the cover.
•
Place adhesive foam pad on top of each leg.
•
Carefully lower top onto base. Position top so it is
centered on the foam support pads.
4.
