4
Do not discard any packaging until assembly is complete and
unit is tested. Keep all included manuals in a safe place for
future reference.
Warning:
Exposed edges may be sharp, use leather gloves
when removing packaging and handling the base. Do not
remove protective cardboard packaging until you have
placed the fire pit in its desired final location.
Place base in desired final location.
Place on a hard, flat surface. Avoid soft surfaces and areas
that collect water.
Refer to Crystal Fire Plus Manual included with your Crystal
Fire Plus Burner for safety information regarding the
placement of your fire pit.
Assembly Instructions
Locate CF-SPARKER inside of Crystal Fire Plus burner box.
Remove CF-SPARKER cap and hex nut. Insert AAA battery
(not included) with + end out.
Install CF-SPARKER into control panel as shown below.
Depress CF-SPARKER button to test your sparker.
Un-packaging
Base Placement
1.
2.
CF-SPARKER Installation
3.
Locate and orient
sparker box on
control panel as
shown. Sparker box
must be installed
before burner valve.
