6
5.
Connect Ground wire and Electrode wire from
burner to sparker box.
Connect ignitor and ground wire to sparker box.
Both wires can connect to either connection point.
The unit will operate in either configuration.
Test system by pushing the button on the igniter.
Consult the troubleshooting section of the Crystal
Fire® Plus Burner Owner’s Manual, if the spark is
weak, intermittent, or not present.
6.
Drop burner into base.
•
Place burner riser (P/N: 10298)
into recessed opening in base.
•
Place burner on top of riser.
• Place Pedestal down first, followed by the
base
• Place burner plate into recessed opening
in base.
• Place burner on top of burner plate
CV-1242
CV-54/CV-72
