7
Plug both
BLACK
wires hanging from the burner into
the back of the CF-SPARKER. If an orange wire is
present, do not use it. The orange wire is for Direct
Spark Ignition system only.
Test system by pushing the button on the igniter.
Consult the troubleshooting section of the Crystal Fire
Burner Owner’s Manual, if the spark is weak,
intermittent, or not present.
Control Panel
Electrode end of burner
Orient burner so that the electrode is nearest to the control
panel in order to make CF-SPARKER box connections.
Electrode Installation
5.
Burner Installation
6.
