4
Do not discard any packaging until assembly is complete and
unit is tested.
Keep all included manuals in a safe place for future
reference.
Place base in desired final location.
Place on a hard, flat surface. Avoid soft surfaces and areas
that collect water.
Refer to Crystal Fire Manual included with your Crystal Fire
Burner for safety information regarding the placement of
your fire pit.
Assembly Instructions
Locate CF-SPARKER inside of crystal fire burner box.
Remove CF-SPARKER cap and hex nut. Insert AAA battery
(not included) with + end out.
Install CF-SPARKER into control panel as shown below.
Depress CF-SPARKER button to test your sparker.
Un-packaging
Base Placement
1.
2.
CF-SPARKER Installation
3.
