Outdoor GreatRoom Company CM-48-DIN-K, Руководство по установке

Страница: 16 / 20

16 | P a g e
3. To properly install ignition system, an Ignition and Ground
wire need to be attached to the igniter box.

Start by plugging the black Ignition wire hanging from
the burner in to one port on the back of the igniter
(either side is fine).

Next; plug the Ground wire into the open port on the
igniter box.

Test system by depressing the button on the igniter. A
continuous repeating spark at the igniter on the burner
means everything is connected properly. Consult the
troubleshooting section of your crystal fire owner’s
manual if spark is weak, intermittent, or not present.
4. Once ignition system is grounded and gas
connections are secured and checked for
leaks, set the burner back into its original
position if it was removed during gas hookup.