GB
5
OPERATING MODES
Refer to Fig 1 to change from one mode to the other.
Note:
Mode display varies for different models, please refer to the previous
function list for detailed.
HOW TO USE THE BACK LIGHT
Press LIGHT to turn on the back light for five seconds.
Note:
a) Any key press will keep the back light to be turn on five second
there when the back light is being turned on.
b) If the battery level is too low, there will be no effect when
pressing the [LIGHT ] button to save the battery of the unit. Once
if you observe this phenomenon, change the watch battery.
SECTION 2 THE CALENDAR CLOCK,
CHRONOMETER AND
THERMOMETER
This section applies to all models.
Refer to diagram A to install the nylon wrist belt to the watch.
There are four display modes when the CLOCK operating mode is
adopted.
Refer to fig 2 to change among the displays.
To display the daily alarm in any of these display modes, press
FUNCTION (fig 2). Then press SELECT to turn on or off the alarm
(fig 4a)
When the daily alarm is activated, it will sound off at the designated
time. Press any control button to mute the alarm.
For OUTBREAKER PRO only
Refer to diagram B to install the additional rubber wrist belt to the watch.
HOW TO SET THE CALENDAR CLOCK
Refer to fig 3 to set the calendar clock.
Note:
The calendar clock may also set through the PC software. To connect
the watch to the PC software please refers to Section 7.
HOW TO SET THE ALARM CLOCK
There are 4 alarms – 1 daily alarm & 3 event alarms equipped in the
watch.
A) SET THE DAILY ALARM CLOCK ON THE WATCH
Refer to fig 4b to set the daily alarm clock.
Note:
a) The alarm will be automatically turned on during the setting
procedure.
b) The event alarm is only settable by PC software only. To connect
the watch to the PC sofware please refer to Section 7.
