12
GB
Refer to fig 18 to display such information and fig 18a to clear the
memory.
Note:
please refer to Section 7 for overall erase memory record.
SECTION 7 ADDITIONAL
INFORMATION
This section applies to all models.
KEY LOCK
You may found that the OUTBREAKER is equipped with a key lock
function to avoid any mis-touch of any key during the activities. To
activate the function, simply press and hold SELECT. Press and hold
the SELECT again to release the key lock function.
Refer to fig 19 on the LCD display in various when the key lock
function is activated.
TOUR MODE
The tour mode retains tour memory for the ALTIMETER,
BAROMETER, HEART RATE and BIKE operating modes.
To activate the tour mode, hold MODE and FUNCTION
simultaneously in any of the above operating modes. The tour
number and total memory used will be displayed. Press and hold
FUNCTION to disable or enable the tour function. You can temporary
stop the recording by making rest on one single tour.
Refer to Fig 20 for the operation.
Note:
a) Once the tour function is disable when it is activated again, a new
tour memory will be started instead.
b) Tour memory can only be retreived on the PC with the PC
docking station together with the PC software only.
c) Tour memory cannot be erased by the operation on the watch, it
can be erased through the PC software only.
d) Difference information such as temperature, altitude, heart rate,
wheel speed, cadence, trip distance etc. could be selected being
recorded for the tour through the PC software.
MARKER
The marker function is used to mark a particular position of a tour.
To use the marker, press and hold MARKER when the tour mode is
in place.
Note:
The marker will only be observed in the data on the PC after
download the tour record from the watch.
