Step 10: Secure guy lines
1) Secure tent using all guy lines and stakes.
Tent must be secured for proper function.
3) Wrap the hook and loop fasteners, sewn on
the underside of the rainfly, around the
fibreglass tent poles.
Step 7: Body assembled
Step 8: Attach rainfly
Step 9: Insert and secure fly pole
1) Insert the fly pole (B) through the sleeve
found at the edge of the fly awning , over
the front door.
1) Unfold the rainfly and place over the tent.
Make sure that the rainfly awning is over the
the front door.
2) Attach the rainfly to the tent by attaching
the plastic s-hook on the rainfly corners to
the metal o-ring at the tent corners.
2) Flex the pole and insert each end into the
reinforced metal grommets located in
the pole sleeves on either side of the door.
Step 12: Disassembly
Step 11: Fully assembled
Step 13: Packing the tent
Tent appears as shown.
1) To take down the tent, disassemble in
reverse order.
2) Remove and fold rainfly.
3) Be sure to leave doors and windows
unzipped to avoid zipper damage.
4) Remove stakes with hammers or stake
puller. DO NOT pull on tent.
5) Carefully disengage poles from pins. Push
poles away from you through the sleeves
to minimize risk of damage to tent or poles.
6) Keep poles and stakes together in bags
provided.
1) Spread tent flat, distribute evenly.
2) Fold into quarters not to exceed the length
of pole bag.
3) Lay pole bag at opposite end from door.
Tightly roll bag, skin and rainfly forcing air
through unzipped door.
4) Secure with ties and place in carry bag with
stakes and accessories.
5) Tent must be clean and dry before storage.
Do not store on concrete floor.
Be certain campfires are extinguished.
Dispose of garbage appropriately.
Dimension A should
be close to but not
exceed the length
of the pole bag.
A
Fold tent into a
rectangular shape.
Front of tent
(door unzipped)
Step 6: Stake tent
1) Stake down the tent by inserting a stake
through the stake loops, located along the
perimeter of the tent.
2) Make certain the tent floor is pulled out
evenly and tightly.
3) Hammer the stakes into the ground at a
45°
angle using a hammer or mallet.
Tent appears as shown.
CTC161007 05/15
