11
Assembly
7. Side Burner Valve Assembly
(a) Remove cooking grid from side burner shelf and set
aside. Remove the two Phillips head screws attaching side
burner to shelf to make room to install side burner
valve(Fig.16).
(b) Remove two screws from side burner control valve face.
Insert side burner valve control stem through hole in side
burner control panel . Place side burner control knob bezel
(V) over side burner valve control stem. Secure bezel to
control panel and valve with 2 screws removed above. (Fig .
17A1).
(c) Insert side burner tube over side burner valve orifice (Fig.
17B1). Use the two previously removed side burner screws
to reattach side burner to side burner shelf.
(d) Push control knob (W) onto valve control stem, and
tighten it use Allen key (EE). (Fig.18)
(e) Plug ignition wire into igniter wire hanging from electrode
on underside of burner (Fig.19).
(f) Replace the side burner cooking grid into the side burner
shelf.
Fig. 17
Fig. 19
Fig. 20
A1
8. Battery Assembly
(a) Unscrew the ignition battery cap. (Found at far left of
control panel.)
(b) Install battery (not supplied) into ignition box with positive
terminal facing outward. (Fig. 20)
(c) Replace the ignition battery cap after the battery has been
installed. (Fig. 20)
V
B1
Fig. 16
Fig. 18
W
B1
EE
