4
C. Assembly
n
TOOLS NEEDED FOR ASSEMBLY:
Medium size flat blade or Philips/crosspoint screwdriver, adjustable spanner or metric spanner set.
n
Remove all packing materials from the components before assembly. Two people are required to perform
assembly of the patio heater as it involves handling of large, heavy parts which may be difficult for one person to
handle. Please read the instructions thoroughly and carefully before assembly and use.
3
Remove the four base screws from the base (A13),
align the holes of the wheel bracket (A17) with the
holes in the base, fix with the four base screws and
slide the wheel axle washers (A16) and wheels
(A15) onto the axle and secure with locknuts (A14).
Assemble the base hull (A12) using the flat screws
(B4), small plain washers (B5) and M4 hex nuts (B6).
The hull is secured using only the two side base
supports. The additional 3 slots in the base hull must
be positioned at the top. Now fully tighten the base
support screws shown in step 2.
Remove the six base support screws from the
base and assemble the base supports (A11). The
additional 3 slots in the base hull must be
positioned at the top.
WARNING
: Do not tighten
the screws fully until step 3 is completed.
A13
A14
A16
A17
A11
Align the three holes of the base top (A10) with the
holes in the base supports, and secure the cover by
threading large plain washers (B2) onto each bolt
(B1), insert the bolts through the aligned holes, and
secure with locknuts (B3).
Align the four holes of the post (A7) with the holes in
the base top (A10). Thread large plain washers (B2)
onto each bolt (B1), insert the bolts through the
aligned holes, and secure with locknuts (B3).
A12
B4
B5
B6
A10
B1
B2
B3
B1 B2 B3
A7
A10
4
1
2
